CI BRIDGEMAN'S FURNACE

Code: 12015-30

APPLICATION:

Bridgeman Furnace is a Vertical Tripple Zone furnace, with 99% pure alumina tube. With 80-85mm ID tube and total length 700mm. Outer made of CR sheet Powder,coated. Temperature max. upto 1200°C. Other Sizes as per requirement.

Got questions? get a call back from us
We are also available on Whatsapp between 11 am to 6 pm

SPECIFICATION:

* Dual Heating Zone of 250mm each

* Cold zone in center of 50mm.

* 99% pure Alumina tube of 80-85dia ID x 700mm length.

* Vertical Furnace, with both sides open.

* Ceramic end caps to close the tube ends as and when required

* 0 Max. Working temp. 1150 C

* Temperature sensors of 'S' Type thermocouples.

* Outer body made of CR sheet Powder coated

* Heating by Silicone Carbide heaters of suitable capacity. with all necessary clamps and fittings.

* The Vertical movement of the sample is driven by a High precision motor with fine screw rod train.

* The movement will be vibration free across the entire operating range

* The speed can be varied from 0.1mm/min. to 10mm/min. and stroke length from 1mm to full length.

* Seperate control unit with 2 independant multi-step profile temperature controllers.

* Movement control by an independent controller with continuos display of speed, stroke, run time and remaining time.

* Provision to integrate the entire operation through a PC (Optional)

* Operation on 440V, 3 Phase, 50Hz.only.

SAFETY FEATURES 

* It has safety features like:Home and end sensors for movement.

* VAF meter to monitor voltage, current and frequency for heater life monitoring.

* Automatic Heater cutoff on sensor failure

* 1 Phase preventor.

* Hot or cold run option

REQUIREMENTS

* Industrial Socket OR 4 POLE MCB 64 Amps rating 

OPTIONAL ACCESSORIES (AT EXTRA COST) 

* Spare Ceramic Board end caps

* Spare Thermocouple

* Spare 99% Alumina Tube

* Spare heating elements (Set of 4 elements)

* Data Logger

OTHER MODELS

* ROCKING FURNACE

* CRYSTAL GROWTH FURNACE

* QUENCHING FURNACE

* THREE ZONE FURNACE

* LOW TEMPERATURE FURNACE

OPTIONAL ACCESSORIES / FEATURES

* Variable Power drive / Thyristor Drive

* Digital Voltage & Current indicator (VAF METER)

* High Set safety cutoff

* Profiling temperature Control

* Digital Timer

* Inert gas flow arrangement

* Vacuum System for tubular furnaces only

* Alumina Tubes

* Alumina Boats

* Quartz tube

* Ceramic Boats

* Ceramic Crucibles

* Silica Crucible

* Platinum Crucible

* Silicon Carbide heating elements

* Ceramic wool

* Ceramic plugs

* Data Loggers

* Thermocouples