COATING THICKNESS GAUGE
COMPLIANCE:
APPLICATION:
COATMEASURE M2S - FERROUS Measures non-magnetic coatings on magnetic base, It is ideal for coating on M.S. (Ferrous base) calibration with Test foils is easy by ZERO and CALbuttons. Instrument has spring loaded probe. Probe has Vgroove for cylindrical parts. Atest piece is provided to check instruments working. It has ’Auto-Off’ to save battery.
It Displays Number of Readings, Average, Max., Min. and the last Reading taken. Interchangeable probe sleeve tip having 3 points for flat & V-Block sleeve for cylindrical surfaces. Low battery indication. Complete with base plate, 7 test foils, and calibration report, in a wooden box. Range: 0-2000Microns
COATMEASURE C2S - NON-FERROUS for non-conductive coatings on conductive base.
TIC MODEL: WH81F
With Integrated probe for Ferrous metals only
* Method : Magnetic For F-type probe
* Measuring Range : 0-1250 microns,
* Resolution 1 micron,
* Power supply : 2 x AABatteries
* Measurement Deviation : One point Calibration, Three Point calibration
* Minimum substrate : 10mm x 10mm ,
* Minimum Curvature : 5mm
* Measurement Units : Microns / Mils
* Ambient Temperature : 0 to 40°C
* Relative Humidity : Less than 85%
* Back light Display, Alarm function, Power off Time. The instrument comes complete with zero plates, calibration foils, Manual, Warranty Card in a soft Carrying case.
TIC MODEL: WH91F
With External probe for Ferrous metals only
* Method : Magnetic For F-type probe
* Measuring Range : 0-1250 microns,
* Resolution 1 micron,
* Power supply : 2 x AABatteries
* Measurement Deviation : Zero calibration, One point Calibration, Three Point calibration, Four Point Calibration
* Minimum substrate : 10mm x 10mm ,
* Minimum Curvature : 5mm
* Measurement Units : Microns / Mils
* Ambient Temperature : 0 to 40°C
* Relative Humidity : Less than 85%
* Back light Display, Alarm function, Power off Time. The instrument comes complete with zero plates, calibration foils, Manual, Warranty card in a soft Carrying case.
TIC MODEL: WH68NFe
With External probe for Non-Ferrous metals only
* Method : Eddy Current principle
* Measuring Range : 0-1250 microns,
* Resolution 1 micron,
* Power supply : 2 x AABatteries
* Measurement Deviation : Zero calibration, One Point Calibration
* Minimum substrate : 10mm x 10mm ,
* Minimum Curvature : 5mm (Convex or Concave)
* Measurement Units : Microns / Mils
* Ambient Temperature : 0 to 40°C
* Relative Humidity : Less than 85% The instrument comes complete with zero plates, calibration foils, Manual, Warranty card in a Carrying case.
‘TIC’ MODEL: WH82FNe
With Integrated probe for Ferrous and Non-Ferrous (FN) for all metals
* Method : Magnetic For F-type probe Eddy Current Method for NF- type probe
* Measuring Range : 0-1250 microns,
* Resolution 1 micron,
* Power supply : 2 x AABatteries
* Measurement Deviation : Zero calibration, One point Calibration, Three Point calibration, Four Point Calibration
* Minimum substrate : 10mm x 10mm ,
* Minimum Curvature : 5mm
* Measurement Units : Microns / Mils
* Ambient Temperature : 0 to 40°C
* Relative humidity : Less than 85% The instrument comes complete with zero plates, calibration foils, Manual, Warranty card in a soft Carrying case.
‘TIC’ MODEL: WH92FNe
With External probe for Ferrous and Non-Ferrous (FN) for all metals
* Method : Magnetic For F-type probe Eddy Current Method for NF- type probe
* Measuring Range : 0-1250 microns,
* Resolution 1 micron,
* Power supply : 2 x AABatteries
* Measurement Deviation : Zero calibration, One point Calibration
* Minimum substrate : 10mm x 10mm
* Minimum Curvature : 5mm (Convex / Concave)
* Wire Length : 25 inches
* Measurement Units : Microns / Mils
* Ambient Temperature : 0 to 40°C
* Relative humidity : Less than 85% The instrument comes complete with zero plates, calibration foils, Manual, Warranty card in a Carrying case.
PEN TYPE
Asimple but efficient instrument, for identification of coating thickness on steels. It has a very small magnet, to measure small parts, Easy to use and carry, lightweight, No batteries. Ideal for measuring non magnetic coatings like paint, enamel, plating on steel. No User adjustments is required, Unit of measurement is microns
DIALTYPE
Using the same magnetic principle, for measurement of coatings, electroplating, enamel, rubber, on steel. Cost effective, Easy to use and carry, lightweight, No batteries. Complete with 2 test foils for calibration in a wooden box
Range:0-100Microns 10031-02
0 - 200Microns 10031-03
0 - 600Microns 10031-04