EXPLOSIVE PROPERTIES - FLAME (KONEN TUBE)
Code: 25002
COMPLIANCE :
* UN Transport of Dangerous Goods recommendations, Manual of Tests and Criteria and to the European Classification, Packaging and Labeling of Dangerous Substances in the European Union guidelines.
* European Commission Directive 92/69/EEC, method A14: Explosive properties
APPLICATION:
To study the reaction of solids and liquids to intense heating under partial confinement.
We are also available on Whatsapp between 11 am to 6 pm
DESCRIPTION AND CONSTRUCTION:
To study the reaction of solids and liquids to intense heating under partial confinement. Designed and manufactured to permit testing to the UN Transport of Dangerous Goods recommendations. Manual of Tests and Criteria and to the European Classification, Packaging and Labelling of Dangerous Substances in the European Union guidelines
Consisting of the resuable 3 piece closing device with 2mm & 6mm orifice. Outer protective sheating with 4 nos gas burners with emergency cutoff switch for gas. but without steel tubes
STANDARD ACCESSORIES/PARTS
25002-00 A Heavy and Sturdy 4 side closed enclosure 1 No.
25002-01 Bunsen Burners with tubing 4 Nos.
25002-02 Propane Flowmeter stand with valves 1 No
25002-03 Closing device 1 Set.
25002-04 Orifice Plate 6mm 1 No.
25002-05 Orifice Plate 2mm 1 No.
25002-06 Steel test tubes 1 No.
25002-13 Safety cutoff switch with solenoid valve 1 Set
OPTIONAL ACCESSORIES & SPARES
25002-07 Orifice Plate 1mm 1 No.
25002-08 ‘K’ type sensor 1mm dia 1 No.
25002-09 Temperature logger with sensor and software 1 Set
25002-10 Calibration chemical(Di-butylthelate) 1 No.(500ml)
25002-11 Lubricant 1 Tube
25002-12 Digital Propane flow controller 1 Set
PRE-INSTALLATION ON-SITE REQUISITES
Space : A separate room/enclosure of minimum 2' x 6' x 10'
Power: 5A plug point with 230V, 50Hz, 1 Ph Ac or 110v
Weight: 20 Kg.
The test enclosure should be grouted to the floor The system should face a wall for safety reasons.