'CI' TUBULAR IMPACT TESTER
COMPLIANCE:
The basic instrument Confirms to ASTM D 2794 with Ball indenter size of 16mm, and falling ball weight 2lbs.
BS 3900-E13 /ISO 6272 with Ball indenter size of 20mm, falling ball weight 1 kg.Conformity to other standards can also be provided on request.
APPLICATION:
Surface coatings are regularly subjected to damage by impact. This
instrument provides proper evaluation of the coating resistance to
impact by falling weight method.
The basic instrument Confirms to ASTM D 2794 with Ball indenter size of
16mm, and falling ball weight 2lbs.
BS 3900-E13 /ISO 6272 with Ball indenter size of 20mm, falling ball weight 1 kg.
Conformity to other standards can also be provided on request.
DESCRIPTION AND CONSTRUCTION:
The instrument consists of a graduated (both cm and inches) vertical seamless light weight aluminium tube, mounted on a heavy solid base. This tube acts as a guide for a predetermined weight with indenter & handle and an adjustable weight holding ring.
The height of fall, means the force of impact can be altered by adjusting the ring guide from variable heights up to 1 meter onto the sample panel firmly placed on the base plate. The force of impact can be increased or decreased by replacing the falling weights.
STANDARD WEIGHT BALL DIA DIE
ISO6272, DIN55669 1 + 1Kg 20mm 27mm
ECCA T5
ASTMD2794 2 lbs 15.9mm(5/8") 16.3mm(0.64")
ECCAT5, T6, 2 + 2 lbs 15.9mm(5/8") 16.3mm(0.64")
ASTMD 3029
NFT 30-017, 1 Kg 23mm 22mm
SNV 27109 2 lbs 12.7mm(1/2") 12.7mm(1/2")
ACCESSORIES
* 2lb/1Kg. weight 10027-01
* 4lb/2Kg. weight 10027-02
* 6lb/3Kg. Weight 10027-03
* With diesets and weights foruse asDUPONT impact tester.10027-04
* Weight Holding Ring 10027-05
* DUPONT weight 500gms. 10027-07
* Die set as per ASTM 10027-08
* Calibration certification to NABL/NPL 10027-06